: Information such as part numbers, quantities, and relevant material standards. Comparison: 2.2 vs. Other Certificate Types
We hereby certify that the products described above are in compliance with the requirements of the order and that the results of the non-specific tests are in accordance with the standard(s) mentioned. certificate 2.2 din en 10204
Choose 2.2 for general applications; choose 3.1 for critical, high-stress environments where full traceability is non-negotiable. : Information such as part numbers, quantities, and
✅ It certifies that the products meet the requirements of the order. ✅ It is based on non-specific testing (not a specific test result for your batch). ✅ It is often suitable for lower-risk applications or when the specific material traceability of a 3.1 certificate is not required by the design code. Choose 2
This document is generated electronically and is valid without a handwritten signature according to the manufacturer's quality system. Certificate 2.1 a 2.2 - Power Rubber
[e.g., Stainless Steel Pipe, Hex Bolts, Welding Wire]
| Property | Unit | Required Value | Actual Result | Test Method | | :--- | :--- | :--- | :--- | :--- | | Yield Strength (Re) | MPa | [e.g., ≥235] | [e.g., 278] | EN ISO 6892-1 | | Tensile Strength (Rm) | MPa | [e.g., 360-510] | [e.g., 412] | EN ISO 6892-1 | | Elongation (A) | % | [e.g., ≥26] | [e.g., 31] | EN ISO 6892-1 | | Chemical Composition (C) | % | [e.g., ≤0.20] | [e.g., 0.18] | OES | | Chemical Composition (Mn) | % | [e.g., ≤1.40] | [e.g., 1.21] | OES | | [Other test, e.g., Hardness] | [unit] | [e.g., ≤200 HB] | [e.g., 185 HB] | [Method] |