Snake Washing Machine Drain Direct

Shine a flashlight down into the standpipe. Occasionally, lint clogs form right at the surface or just inside the rim. If you can see the blockage near the top, use a pair of long-needle-nosed pliers to pull it out directly. If the clog is deeper down, proceed to use the snake. 4. Feed the Snake into the Pipe

Place a bucket under the drain hose connection. Slide the drain hose out of the standpipe. Some water will pour out—let it drain into the bucket. snake washing machine drain

Just remember: go slow, wear gloves, and never pour drain chemicals before snaking. Happy plumbing Shine a flashlight down into the standpipe

Water backs up and spills out of the vertical drain pipe during the washer's spin or drain cycle. If the clog is deeper down, proceed to use the snake

Shine a flashlight down the open standpipe. Can you see standing water just a few inches down? That confirms a clog. Look for any visible debris (like a sock) that you might grab with needle-nose pliers.

Before reassembling the washing machine setup, verify that the line is clear. Pour a gallon of hot water down the standpipe using a pitcher or a funnel. If the water drains instantly without backing up, the clog is successfully cleared. If it fills up, repeat the snaking process to catch any remaining debris deeper in the line. 8. Reassemble and Test