How to Reset the Admin Password on a Singtel Router Forgetting your Singtel router’s admin password is a common issue. The admin password is different from your Wi-Fi password — it’s the one you use to log into the router’s settings page (e.g., 192.168.1.254 ). If you can’t log in, you have two options: find the default password or factory reset the router .
⚠️ Note: A factory reset will erase all your custom settings (Wi-Fi name/password, port forwarding, etc.). Only proceed if you cannot find the current admin password.
Option 1: Check for Default Admin Credentials Before resetting, try the default login details printed on your router.
Flip your Singtel router over. Look for a sticker labeled "Default Login" , "Admin Login" , or "Router Settings" . Typical defaults are: how to reset singtel router admin password
Username: admin Password: Huawei@123 or Singtel@123 (varies by model) Common models: AC Plus, AC Elite, Arcadyan, Aztech, Singtel Mesh Router
If the sticker doesn’t work, try these common Singtel defaults: | Model | Default Username | Default Password | |---------------------|------------------|-----------------------| | Singtel AC Plus | admin | Huawei@123 | | Singtel AC Elite | admin | admin (or blank) | | Arcadyan (VRV9517) | admin | printed on sticker | | Aztech DSL7000GRV | admin | admin or Singtel@123 | If none work, you’ll need a factory reset. Option 2: Factory Reset the Router This restores the router to its original state, including the default admin password. Step-by-Step Reset Process
Keep the router powered on. Locate the reset button – usually a small, recessed pinhole on the back or bottom, labeled "Reset" or "RST" . Use a paperclip or pin to press and hold the reset button. Hold for 10–15 seconds until all the lights on the front blink off and then start flashing again. Release the button. The router will reboot (this takes 2–3 minutes). How to Reset the Admin Password on a
✅ After resetting, the router will use the default admin credentials printed on the sticker.
Option 3: Log In and Change the Admin Password Once you’re back in, create a new admin password so you don’t forget it again.
Connect your computer or phone to the Singtel router (Wi-Fi or Ethernet). Open a browser and go to http://192.168.1.254 (or 192.168.0.1 for older models). Log in with the default username and password (from the sticker). Navigate to Advanced → System → Admin Password (path may vary by model). Enter your new admin password and save the changes. ⚠️ Note: A factory reset will erase all
Troubleshooting
Can’t access 192.168.1.254? Check your IP address: On Windows, run ipconfig and look for Default Gateway . On Mac, go to System Settings → Network → Router.