3301pa Nylon

This report is based on publicly available technical data from 3D Systems and industry standards. Actual values may vary with print orientation, layer thickness, and post-processing.

. It is engineered for industrial-grade parts that require a balance of high strength, impact resistance, and thermal stability. JLC3DP +3 Key Technical Specifications Property Value Material Technology Selective Laser Sintering (SLS) Tensile Strength ~45 MPa Tensile Modulus ~1,700 MPa Heat Deflection Temp (HDT) 140°C to 179°C (dependent on load/conditions) Elongation at Break ~35% Surface Texture Grainy/Matte Color White Design Guidelines To ensure successful prints with 3301PA Nylon, follow these design standards recommended by JLC3DP and ChanHonTech : Minimum Wall Thickness 3301pa nylon

| Property | Value | | :--- | :--- | | | Polyamide 11 (Nylon 11) | | Appearance | White powder | | Particle Size (D50) | ~50-60 microns (optimized for SLS) | | Melting Point | ~186°C (367°F) | | Density (Part) | ~1.01 g/cm³ | This report is based on publicly available technical

3301PA is optimized for the SLS process, which provides several manufacturing benefits: 3301PA Nylon - JLC3DP It is engineered for industrial-grade parts that require

3301 PA is a workhorse material used across diverse industries:

| Material | Stiffness | Elongation | Impact | Best Use Case | | :--- | :--- | :--- | :--- | :--- | | | Low | Very High | Excellent | Hinges, clips, durable housings | | PA12 (e.g., 3200PA) | Medium | Medium | Good | General-purpose, rigid prototypes | | Alumide (PA12 + Al) | High | Low | Low | Stiff, metal-like appearance |