Branchement Volet Roulant 4 Fils Teleco [2021] -

After wiring, program the remote:

at the main circuit breaker before touching any wires. branchement volet roulant 4 fils teleco

| Problem | Likely Cause | Solution | |---------|--------------|----------| | Motor does not move | Missing neutral through Common | Ensure motor blue is on Com, not direct N | | Motor moves one direction only | One phase (brown/black) disconnected | Check wiring at receiver and motor | | Shutter direction reversed | Up/down wires swapped | Swap brown and black on receiver | | Remote not pairing | Receiver not in learn mode | Power cycle receiver, retry PROG sequence | | Buzzing but no movement | Dead capacitor (if motor has one) | Capacitor is inside motor – replace motor | After wiring, program the remote: at the main

If you need the exact wiring for a (e.g., Telis 1 RTS, Telis 4 RTS Moduris, or Oximo), provide the model number and I can refine the pinout. This document covers 95% of standard 4-wire rolling shutter installations with Telco radio control. La terre, indispensable pour la protection électrique

La terre, indispensable pour la protection électrique. Étapes de Branchement sur le Récepteur Teleco