Mikrotik Hot!: L2tp Server

Create a new L2TP/IPSec profile:

/ip pool add name=vpn-pool ranges=192.168.100.2-192.168.100.100 /ppp profile add name="l2tp-profile" local-address=192.168.100.1 remote-address=vpn-pool dns-server=8.8.8.8 use-encryption=required /interface l2tp-server server set enabled=yes default-profile="l2tp-profile" use-ipsec=yes ipsec-secret=MySecretKey123 /ppp secret add name=admin password=ChangeMe service=l2tp profile="l2tp-profile" /ip firewall filter add chain=input protocol=udp dst-port=500,4500 action=accept /ip firewall filter add chain=input protocol=ipsec-esp action=accept /ip firewall filter add chain=input protocol=udp dst-port=1701 action=accept /ip firewall filter add chain=forward src-address=192.168.100.0/24 action=accept /ip firewall nat add chain=srcnat src-address=192.168.100.0/24 action=masquerade l2tp server mikrotik

For the VPN to work, your router must allow the specific ports used by L2TP and IPsec through the "Input" chain. Open New Terminal and paste these commands: Create a new L2TP/IPSec profile: /ip pool add

: Enable the server and set an IPsec secret for encryption. l2tp server mikrotik